| opaallanalysis(8) | IFSFFCLIRG (Man Page) | opaallanalysis(8) |
NAME¶
opaallanalysis
(All) opaallanalysis command performs the set of analysis specified in FF_ALL_ANALYSIS and can be specified for fabric, chassis, esm, or hostsm.
Syntax¶
opaallanalysis [-b|-e] [-s] [-d dir] [-c file] [-t
portsfile]
[-p ports] [-F chassisfile] [-H 'chassis'] [-G
esmchassisfile]
[-E esmchassis] [-T topology_input]
Options¶
- --help
- Produces full help text.
- -b
- Sets the baseline mode. Default is compare/check mode.
- -e
- Evaluates health only. Default is compare/check mode.
- -s
- Saves history of failures (errors/differences).
- -d dir
- Identifies the top-level directory for saving baseline and history of failed checks. Default is /var/usr/lib/opa/analysis
- -c file
- Specifies the error thresholds configuration file. Default is /etc/opa/opamon.conf
- -t portsfile
- Specifies the file with list of local HFI ports used to access fabric(s) for analysis. Default is /etc/opa/ports
- -p ports
- Specifies the list of local HFI ports used to access fabric(s) for analysis. Default is the first active port. Specified as HFI:port as follows:
0:0 First active port in system.
0:y Port y within system.
x:0 First active port on HFI x.
x:y HFI x, port y.
- -F chassisfile
- Specifies the file with a chassis in a cluster. Default is /etc/opa/chassis
- -H 'chassis'
- Specifies the list of chassis on which to execute the command.
- -G esmchassisfile
- Specifies the file with embedded SM chassis in the cluster. Default is /etc/opa/esm_chassis
- -E esmchassis
- Specifies the list of embedded SM chassis to analyze.
- -T topology_input
- Specifies the name of topology input file to use. Any %P markers in this filename are replaced with the HFI:port being operated on, such as 0:0 or 1:2. Default is /etc/opa/topology.%P.xml. If -T NONE is specified, no topology input file is used. See opareport for more information.
Example¶
opaallanalysis
opaallanalysis -p '1:1 2:1'
Environment Variables¶
The following environment variables are also used by this command:
- PORTS
- List of ports, used in absence of -t and -p.
- PORTS_FILE
- File containing list of ports, used in absence of -t and -p.
- FF_TOPOLOGY_FILE
- File containing topology_input (may have %P marker in filename), used in absence of -T.
- CHASSIS
- List of chassis, used if -F and -H options are not supplied.
- CHASSIS_FILE
- File containing list of chassis, used if -F and -H options are not supplied.
- ESM_CHASSIS
- List of SM chassis, used if -G and -E options are not supplied.
- ESM_CHASSIS_FILE
- File containing list of SM chassis, used if -G and -E options are not supplied.
- FF_ANALYSIS_DIR
- Top level directory for baselines and failed health checks.
- FF_CHASSIS_CMDS
- List of commands to issue during analysis, unused if -e option supplied.
- FF_CHASSIS_HEALTH
- Single command to issue to check overall health during analysis, unused if -b option supplied
Details¶
The opaallanalysis command performs the set of analysis specified in FF_ALL_ANALYSIS, which must be a space-separated list. This can be provided by the environment or using /etc/opa/opafastfabric.conf. The analysis set includes the options: fabric, chassis, esm, or hostsm. For a fabric with only externally managed switches, FF_ALL_ANALYSIS should be set to -fabric in opafastfabric.conf.
Note that the opaallanalysis command has options which are a super-set of the options for all other analysis commands. The options are passed along to the respective tools as needed. For example, the -c file option is passed on to opafabricanalysis if it is specified in FF_ALL_ANALYSIS.
The output files are all the output files for the FF_ALL_ANALYSIS selected set of analysis. See the previous sections for the specific output files.
| Intel Corporation | Copyright(C) 2015-2018 |